The EASZ-1 will monitor water levels in hydraulic oil, lubrication
fluids and fuels.
It will monitor your lowest levels of moisture in oil and your
highest level of water contamination.
For more information visit http://www.eesiflo.com/products/easz1_01.html
Dealing with water in oils
It is possible that you may come across a system with murky oil.
Oil becomes murky when it is contaminated with water above its
saturation level. The saturation level is the amount of water
that can dissolve in the oil's molecular chemistry . It can be
presumed that if oil is cloudy it indicates that a unhealthy amount
of water is present however it is common to find oil systems with
murky oil greater than 1% (10,000 ppm) water when problems have
occurred with leaks or unreliable water removal systems. The EASZ-1
online moisture level transmitter can be set to measure contaminations
from 0-1% (10,000 ppm) and it also has other higher ranges that
can be chosen through a dip fix selector.
Why you should monitor water levels in oil?
A number of factors need to be considered when selecting water
contamination targets, including the type of oil system and reliability
objectives for the equipment. It's always wise to control water
contamination at the lowest levels that can reasonably be achieved,
ideally to the lowest levels possible at the operating temperature.
THE EASZ-1 is a unique system from EESIFLO that provides operators
of all types of engines, turbines, thrusters, azipods, gears,
separators and stabilisers with a mean of continuous monitoring
of the oil systems for possible water contamination.
Water in oil can cause quick and costly breakdowns. It can happen
so fast that, in many cases, water in oil can be treated as a
more serious contamination problem than metal particle contamination
The EASZ-1 can be used in on-line moisture monitoring and as a
control instrument allowing separators and oil purifiers to be
started only when needed or as a diagnostic or preventative device
protecting critical systems from premature failure.
The EASZ-1 water in oil analyser can give early warning of a
problem so that corrective action can be taken. The EASZ-1 is
an accurate device that measures water contamination below and
above the Saturation point. It is compact, lightweight and economically
priced.
Contact your nearest EESIFLO dealer for more information or log
onto http://www.eesiflo.com
