EESIFLO has recently made a major acquisition of a Swedish research and development company that had previously involved itself since the early 90's in the study and production of highly stable dielectric nased based technologies to measure both minute and larger contents of water in oil. Measurement of dielectric strength can also be used as an indication of oil quality.

The EASZ-1 has the ability to accurately measure in low range ppm values and higher percentages with a response time of one second. The problems that have faced previous attempts of dielectric devices stemmed from the electronics drifting and poorly designed circuit boards that did not use newer digital techniques. Almost ten years research and development has produced a loop powered mini sensor that that acts as a capacitor plate with increased dielectric measurement capabilites. The sensor can also be used on any liquids which are not conductors.

Each water in oil transmitter is electronically calibrated and tested to perform within certain tolerances. Alot of care is taken during assembly and testing to ensure that each EASZ-1 sensor that leaves production will work to within its specifications.

Water contamination of hydraulic and lubricating oils can cause serious damage to bearings and other lubricated components - often without the equipment user being aware that damage is occurring.

EESIFLO's EASZ-1 water in oil monitor provides early or immediate warning of any increase in water content or a change in dielectric so that corrective action can be taken. RS-485 is optional and the EESIFLO development team are working on a HART protocol addition.

Website www.eesiflo.com