Digital multimeter

MeterCenter is a national distributor of both analog and digital panel meters, bargraphs, controllers, transducers, flow meters, process control systems, and general purpose test equipment, by the world's leading manufacturers. They include Biddle, Megger, Datel, Yokogawa, Texmate, Weber Sensors, Triplett and others.
More»

Digital Multimeter: Don't spend all of your time and money trying to figure out small electrical problems! Locate problems quickly with this Digital Multimeter! This convenient, accurate meter can be used to test alarm system wiring, install three-way switches, and to test voltage and resistance on cables and wires. When installing three-way switches, it is invaluable for locating the wires in the wall that have power. Without the Multimeter, it is easy to connect the slave and master wires incorrectly, resulting in a faulty switch! The Digital Multimeter features a huge 1-inch, 2000-count (3½ digit) display that can be tilted to provide the best viewing angle possible. It also features an alarm that alerts you when you are you using the wrong test lead positions for a selected function (which can result in damage to the meter). The Multimeter can measure AC/DC voltage, current, resistance, diode, continuity and transistor, and can even test 9-volt or 1.5-volt batteries! Comes with 9-volt battery, test leads, and a protective holster.
Features: • Adjustable display for a variety of working situations • Locate shorted or open wires, identify slave and master wires easily • 0.5% DCV accuracy • Huge, easy to read LCD display
http://www.smarthome.com/9028.html

Digital Multimeter: The 5075 comes with AC and DC voltage and current, resistance, capacitance and PTR temperature range installed, even the IEEE interface comes as standard. Optional item is a low thermal EMF 10 or 20 channel scanner which is ideal for input switching, thermocouple measurements or monitoring applications.
Features: • 7 digit resolution • AC voltages from 3mV (resol: 100nV) to 3kV • DC voltages from 3mV (resol: 10nV) to 10kV • AC and DC currents from 3uA to 30A • Resistance 30mOhm (resol: 10nOhm) to 1GOhm • Capacitance 30nF to 300uF • Frequency 1Hz to 100kHz • PT100 -200degC to 600degC • Scanner 10 or 20 channels • 18ppm per year accuracy
http://www.timeelectronics.co.uk/5075.html

FLUKE73 series III digital multimeter: Now you have the chance to buy this multimeter for a very convenient price. FLUKE77 it is the choice of thousands of amateur and proffesional electronics technicians. New styling, 3200 count display with analogue bargraph, 1000V and 10A ranges for both AC and DC, auto-ranging plus all the other features of the Fluke 75, rated at 600V Cat III and 1000V Cat II.
Specifications: • Rugged overmolded case. • Default autorange mode. • Automatic touch-hold to capture stable non-zero readings. • Meets IEC 1010 safety standards for 600 Volt CAT II applications. • Protected from overvoltage transients to 4kV per IEC 1010-1. • 3200 display counts. • Analogue bargraph. • Fused current inputs. • DCV: 600 Volts max, 0.3% accuracy • ACV: 600 Volts max, 2% accuracy • DC/AC current: 10 Amps • Resistance: 32MOhm, 0.5% accuracy
http://www.monitortest.net/digitalmultimeter.asp

DIGITAL MULTIMETER 20-RANGE AC/DC VOLTS; DC AMPS; OHMS: This digital multimeter has the compact design and the functions you need for overall convenience. Its capabilites are equal to many higher priced multimeters. Comes with test leads, protective holster, instructions and 9 volt battery.
Features: • 20 Test ranges, 7 functions • Fully fuse protected • 10 Meg/Ohm impedance • 10 Amp range • Continuity beeper
http://www.sjdiscounttools.com/esi-380.html

38XX Series VXI Digital Multimeter & M-Modules : The new 38XX Digital Multimeter (DMM) Series provides unmatched capability and performance at a competitive price. The 38XX Series is a one wide, C-size VXI card which comes standard with a Digital Multimeter (DMM) and the capability of adding an industry standard M-Module mezzanine card. The on-board 6.5 digit DMM is a high performance Digital Multimeter optimized for a variety of applications. We offer M-Module (Mezzanine Module) instrumentation products for seamless integration with our wide range of VXI-based switching systems. The use of M-modules instead of traditional instruments reduces costs and resolves the challenge of customizing test system hardware and software interfaces between switches and instrumentation.
http://www.ascor-inc.com/3000_dmm.htm

Links

Multimeter Warehouse: http://www.multimeterwarehouse.com/digital.htm

Please fill in the requested form in order to suggest your company's website to www.measurementdirectory. Your site will be evaluated and one of our representatives will contact you to discuss adding content within the directory.
click here>>